This Plastic Heat Sealer is the machine of mechanical seal packing container. In order to keep the product quality and avoid the loss of product, it can be used to seal the product after taking it out from the container. The heating time is very short and will save you time. The weight of this machine is light, you can carry and use it easily. 

FEATURES:

• Suitable for PE/PP bags

• Light weight, easy to use it

• Strong power but don't waste electricity

• Heat time is short

• It is made of plastic material

• More accurate with precision electronic control

• Avoid the loss of product

SPECIFICATIONS:

• Sealing Length: 7.87" / 20cm

• Source: 110V / 50Hz

• Power: 300W

• Suitable for: PE/PP Bags

• Impluse Sealing for: Power-saving

• Circuit: Precision Electronic Control

• Max Sealing Thickness: 0.2mm

• Heat Time: 0.2 -1.3s

• Color: Blue

• Dimensions: (12.99 x 3.94 x 6.77)" / (33 x 10 x 17.2)cm (L x W x H)

• Weight: 45.86oz / 1300g

• Size: 8"

• Plug Type: US Standard

• Material: Plastic

PACKAGE INCLUDES:
1 x Heat Sealer
1 x Teflon Tapes

HOW TO USE:

1. No power switch required (auto-control), link the AC power cord with the socket, adjust heating time just according to the thickness of the sealing-in material; put the plastic bag on the sealing-in surface and press the handle, the circuit will automatically control heating time. The power will automatically shut down when the indicator light goes out. After 1-2 seconds, release the handle to finish sealing.

2. Any damage that occurs during sealing is because of an over-long heating time, please spin the rotary knob anticlockwise to shorten the heating time.

3. Too-short heating time will cause unstable sealing. Please spin the rotary knob clockwise to lengthen the heating time

4. If the plastic bag sticks to the rubber pressing board, it means the cooling time is insufficient. You must lengthen the cooling time after indicator light extinguishment. Slightly late to release the handle

5. Remain the heating time unchanged after adjustment, and no need to adjust it during continuous service.

6. Keep the AC power cord always inserted on the socket, no electricity consumption when there is no sealing.

WARM PROMPT:

1. Always keep the sealing surface clean, and avoid any residue oxidation on the surface to reduce the ribbon heater and lifespan of the heat-resisting fabric.

2. Don't use a wet cloth to scrub the sealing surface.

3. Worn-out liner under ribbon heater will cause a short circuit and finally damage the ribbon heater. So, it is a must to check up liner condition every time you change the ribbon heater. Replace a new one once there is any damage.

4. When you have to change the ribbon heater, you must choose a ribbon heater with the same specification as the original one.